This Smart Bathroom Mirror with Temperature Display shows the current room temperature on the mirror. The mirror is a 5mm copper-free silver mirror with a ground edge. The temperature numbers appear as a floating display using the same laser-etching and LED tube method. After a hot shower, you can check the temperature on the mirror. You will know if it is cold outside the bathroom. You can decide what to wear. In autumn and winter, the bathroom may be warm from the heater. But the room outside is cold. This small temperature reminder helps you avoid catching a cold.
The temperature sensor sits on the mirror back. It is a high-precision digital sensor with ±0.5°C accuracy. A chip reads the sensor data and drives the display. Many people ask if the mirror back temperature affects the reading. We put a thermal pad between the sensor and the mirror back. This ensures the sensor measures air temperature, not mirror temperature. The sensor is at the bottom of the mirror back. Hot air rises and cool air sinks. The bottom area best represents the average room temperature.
The default display is Celsius (°C). This works for most countries. If you are exporting to the US or other countries that use Fahrenheit (°F), we can switch the display to Fahrenheit at the factory. The switch is simple. A small DIP switch on the mirror back. Flip it once to switch between °C and °F. The temperature range is -9°C to 60°C (-15°F to 140°F). This covers all bathroom conditions. The temperature display can link with the main light or run independently. We recommend independent display. It uses very little power and can stay on 24/7.
If you want both time and temperature, we can put both displays on the same mirror. The usual layout is time in the top right corner and temperature in the bottom right corner. Or the other way around. The two displays are controlled independently. Their brightness adjusts together. Even with both functions, the mirror looks clean. When the displays are off, you cannot see any screen or markings on the mirror.
Specifications
|
Parameter |
Specification |
|
Mirror Material |
5mm copper-free silver mirror |
|
Display Type |
LED digital tube (floating display) |
|
Temperature Range |
-9°C to 60°C (-15°F to 140°F) |
|
Measurement Accuracy |
±0.5°C |
|
Scale Switch |
°C/°F switchable (DIP switch) |
Frequently Asked Questions
Q: Is the temperature reading accurate?
A: Yes. ±0.5°C accuracy. Good enough for daily use.
Q: Does the temperature sensor need calibration?
A: No. It is calibrated at the factory. It does not drift over time.
Q: Can the display show outdoor temperature?
A: No. It measures indoor temperature only. For outdoor, you need an external probe. That is a custom request.
Hot Tags: smart bathroom mirror with temperature display, China smart bathroom mirror with temperature display manufacturers, suppliers, factory
