Mirror Cabinet

The Mirror Cabinet combines a mirror with a storage cabinet. The front is a full 5mm copper-free silver mirror. Open it and there is storage space inside. You can put skincare products, toothbrushes, face wash, razors, and other daily items. The Mirror Cabinet keeps your vanity top clean and organized. It is especially good for small bathrooms where counter space is limited. The cabinet uses wall space for storage. You keep the mirror function and gain storage space. The mirror can have a ground edge. You can also add an LED strip (that would be our LED Mirror Cabinet, Product 41).

Our Mirror Cabinet interior depth is usually 10 to 15cm. This fits most skincare bottles (under 15cm tall). The shelves are height-adjustable. If your bottles are tall, move the shelf up one notch. If you store small items like razor blades or toothbrush heads, move the shelf down for an extra layer. We also put a non-slip mat inside. Items do not slide around. You will not hear bottles clinking when you open the door.

The cabinet door opens and closes many times each day. Hinge quality matters. We use imported soft-close hinges. They are tested for 50,000 open-close cycles. The soft-close function means the door does not slam shut. It closes slowly and gently. Quiet and safe (no pinched fingers). The hinges are hidden from view. No screws or hardware visible from the outside.

A Mirror Cabinet is heavier than a plain mirror because of the back panel and shelves. Wall load capacity is more important. We recommend installing the cabinet on a load-bearing wall. Use expansion screws. Do not use adhesive tape only. The mounting brackets are supplied. Two stainless steel hangers go on the left and right sides of the cabinet back. The hangers hook onto wall screws. Very secure. We recommend a 30 to 40cm gap between the cabinet bottom and the vanity top. This keeps the cabinet clear of the faucet and makes it easy to open the door.